TDA1517ATW设计的8W BTL音频功率放大技术
时间:2023-09-29 10:35来源: 作者: 点击: 次
是 或2 × 4 W SE器，在HTSSOP20封装内集成了AB类输出器，可用作单声道桥接负载（）或立体声单端（SE）连接，具有良好的波纹抑制以及AC和DC短路安全。本文介绍了主要特性，方框图以及和SE连接应用框图。
：8 W BTL or 2 × 4 W SE power amplifier
The TDA1517ATW is an integrated class-AB output amplifier contained in a plastic heatsink thin shrink small outline package (HTSSOP20). The device is primarily developed for multimedia applications.
TDA1517ATW 主要特性：
Requires very few external components
Flexibility in use: mono Bridge-Tied Load (BTL) and stereo Single-Ended (SE); it should be noted that in stereo applications the outputs of both amplifiers are in opposite phase
High output power
Low offset voltage at output (important for BTL)
Fixed gain
Good ripple rejection
Mode select switch (operating, mute and standby)
AC and DC short-circuit safe to ground and VP
Electrostatic discharge protection
Thermal protection
Reverse polarity safe
Capable of handling high energy on outputs (VP = 0 V)
No switch-on/switch-off plop
Low thermal resistance.
图1。TDA1517ATW 方框图
：8 W BTL or 2 × 4 W SE power amplifier
The TDA1517ATW is an integrated class-AB output amplifier contained in a plastic heatsink thin shrink small outline package (HTSSOP20). The device is primarily developed for multimedia applications.
TDA1517ATW 主要特性：
Requires very few external components
Flexibility in use: mono Bridge-Tied Load (BTL) and stereo Single-Ended (SE); it should be noted that in stereo applications the outputs of both amplifiers are in opposite phase
High output power
Low offset voltage at output (important for BTL)
Fixed gain
Good ripple rejection
Mode select switch (operating, mute and standby)
AC and DC short-circuit safe to ground and VP
Electrostatic discharge protection
Thermal protection
Reverse polarity safe
Capable of handling high energy on outputs (VP = 0 V)
No switch-on/switch-off plop
Low thermal resistance.
图1。TDA1517ATW 方框图
